Amplifier TOA

 Mixer Amplifier ZA-2030

The ZA-2030 is a high cost-performance mixer power amplifier suited for broadcasting paging or background music in schools, offices, shops, factories, mosques, churches and large rooms.

 

Specifications

Power Source	220 - 240 V AC, or 24 V DC
Rated Output	30 W
Power Consumption	34 W (EN60065), 2 A (DC operation at rated output)
Frequency Response	50 - 20,000 Hz (±3 dB)
Distortion	1% or less at 1 kHz, 1/3 rated power
Input	MIC 1: -60 dB*, 600 Ω, balanced, DIN type (5 pins) MIC 2, 3: -60 dB*, 600 Ω, balanced, phone jack AUX 1, 2: -20 dB*, 10 kΩ, unbalanced, RCA pin jack Mute: Contact pin 4 - 5 closure input (for MIC 1)
Output	Speaker out: Balanced (floating), M3.5 screw terminal, distance between barriers: 8.3 mm (0.33") High impedance: 330 Ω (100 V), 170 Ω (70 V) Low impedance: 4 Ω (11 V) Rec out: 0 dB*, 600 Ω, unbalanced, RCA pin jack
Phantom Power	DC +21 V (MIC 1)
S/N Ratio	60 dB or more
Tone Control	Bass: ±10 dB at 100 Hz Treble: ±10 dB at 10 kHz
Muting	MIC 1 overrides other input signals with 0 - 30 dB attenuation by mute terminal contact in MIC 1 DIN type connector.
Finish	Panel: ABS resin, black Case: Steel plate, black
Dimensions	420 (W) × 100.9 (H) × 280.3 (D) mm (16.54" × 3.97" × 11.04")
Weight	5 kg (11.05 lb)

* 0 dB = 1 V

ZA-2060

  

The ZA-2060 is a high cost-performance mixer power amplifier suited for broadcasting paging or background music in schools, offices, shops, factories, mosques, churches and large rooms.

   

Specifications

Power Source	220 - 240 V AC, or 24 V DC
Rated Output	60 W
Power Consumption	72 W (EN60065), 4 A (DC operation at rated output)
Frequency Response	50 - 20,000 Hz (±3 dB)
Distortion	1% or less at 1 kHz, 1/3 rated power
Input	MIC 1: -60 dB*, 600 Ω, balanced, DIN type (5 pins) MIC 2, 3: -60 dB*, 600 Ω, balanced, phone jack AUX 1, 2: -20 dB*, 10 kΩ, unbalanced, RCA pin jack Mute: Contact pin 4 - 5 closure input (for MIC 1)
Output	Speaker out: Balanced (floating), M3.5 screw terminal, distance between barriers: 8.3 mm (0.33") High impedance: 170 Ω (100 V), 83 Ω (70 V) Low impedance: 4 Ω (15.5 V) Rec out: 0 dB*, 600 Ω, unbalanced, RCA pin jack
Phantom Power	DC +21 V (MIC 1)
S/N Ratio	60 dB or more
Tone Control	Bass: ±10 dB at 100 Hz Treble: ±10 dB at 10 kHz
Muting	MIC 1 overrides other input signals with 0 - 30 dB attenuation by mute terminal contact in MIC 1 DIN type connector.
Finish	Panel: ABS resin, black Case: Steel plate, black
Dimensions	420 (W) × 100.9 (H) × 280.3 (D) mm (16.54" × 3.97" × 11.04")
Weight	7 kg (15.43 lb)

* 0 dB = 1 V

ZA-2120

  

The ZA-2120 is a high cost-performance mixer power amplifier suited for broadcasting paging or background music in schools, offices, shops, factories, mosques, churches and large rooms.

   

Specifications

Power Source	220 - 240 V AC, or 24 V DC
Rated Output	120 W
Power Consumption	124 W (EN60065), 8 A (DC operation at rated output)
Frequency Response	50 - 20,000 Hz (±3 dB)
Distortion	1% or less at 1 kHz, 1/3 rated power
Input	MIC 1: -60 dB*, 600 Ω, balanced, DIN type (5 pins) MIC 2, 3: -60 dB*, 600 Ω, balanced, phone jack AUX 1, 2: -20 dB*, 10 kΩ, unbalanced, RCA pin jack Mute: Contact pin 4 - 5 closure input (for MIC 1)
Output	Speaker out: Balanced (floating), M3.5 screw terminal, distance between barriers: 8.3 mm (0.33") High impedance: 83 Ω (100 V), 42 Ω (70 V) Low impedance: 4 Ω (22 V) Rec out: 0 dB*, 600 Ω, unbalanced, RCA pin jack
Phantom Power	DC +21 V (MIC 1)
S/N Ratio	60 dB or more
Tone Control	Bass: ±10 dB at 100 Hz Treble: ±10 dB at 10 kHz
Muting	MIC 1 overrides other input signals with 0 - 30 dB attenuation by mute terminal contact in MIC 1 DIN type connector.
Finish	Panel: ABS resin, black Case: Steel plate, black
Dimensions	420 (W) × 100.9 (H) × 360.3 (D) mm (16.54" × 3.97" × 14.19")
Weight	10.8 kg (23.81 lb)

* 0 dB = 1 V

ZA-2240

  

The ZA-2240 is a high cost-performance mixer power amplifier suited for broadcasting paging or background music in schools, offices, shops, factories, mosques, churches and large rooms.

   

Specifications

Power Source	220 - 240 V AC, or 24 V DC
Rated Output	240 W
Power Consumption	238 W (EN60065), 15 A (DC operation at rated output)
Frequency Response	50 - 20,000 Hz (±3 dB)
Distortion	1% or less at 1 kHz, 1/3 rated power
Input	MIC 1: -60 dB*, 600 Ω, balanced, DIN type (5 pins) MIC 2, 3: -60 dB*, 600 Ω, balanced, phone jack AUX 1, 2: -20 dB*, 10 kΩ, unbalanced, RCA pin jack Mute: Contact pin 4 - 5 closure input (for MIC 1)
Output	Speaker out: Balanced (floating), M3.5 screw terminal, distance between barriers: 8.3 mm (0.33") High impedance: 42 Ω (100 V), 21 Ω (70 V) Low impedance: 4 Ω (31 V) Rec out: 0 dB*, 600 Ω, unbalanced, RCA pin jack
Phantom Power	DC +21 V (MIC 1)
S/N Ratio	60 dB or more
Tone Control	Bass: ±10 dB at 100 Hz Treble: ±10 dB at 10 kHz
Muting	MIC 1 overrides other input signals with 0 - 30 dB attenuation by mute terminal contact in MIC 1 DIN type connector.
Ventilation	Fan cooling
Finish	Panel: ABS resin, black Case: Steel plate, black
Dimensions	420 (W) × 100.9 (H) × 360.3 (D) mm (16.54" × 3.97" × 14.19")
Weight	13.2 kg (29.1 lb)

* 0 dB = 1 V

ZP-2240

  

The ZP-2240 is power amplifier featuring high cost performance suit for paging applications in schools, churches, offices and retail stores.

Specifications

Power Source	220 - 240 V AC, or 24 - 30 V DC
Rated Output	240 W
Power Consumption	238 W (EN60065), 520 W (AC operation at rated output), 15 A (DC operation at rated output)
Frequency Response	50 - 20,000 Hz (±3 dB)
Distortion	1% or less at 1 kHz, 1/3 rated power
Input	Line in: 0 dB*, 10 kΩ, balanced, screw terminal, distance between barriers: 8.3 mm (0.33") Speaker line in: 40 dB*, 330 kΩ, unbalanced, screw terminal, distance between barriers: 8.3 mm (0.33") Power remote control: Make contact
Output	Loop out: 0 dB*, 10 kΩ, balanced, screw terminal, distance between barriers: 8.3 mm (0.33") Speaker out: Balanced (floating) High impedance: 42 Ω (100 V), 21 Ω (70 V) Low impedance: 4 Ω (31 V)
S/N Ratio	60 dB or more
Tone Control	Bass: ±10 dB at 100 Hz Treble: ±10 dB at 10 kHz
Ventilation	Fan cooling
Finish	Panel: ABS resin, black Case: Steel plate, black
Dimensions	420 (W) × 100.9 (H) × 351.3 (D) mm (16.54" × 3.97" × 13.83")
Weight	15.5 kg (34.17 lb)

* 0 dB = 1 V

ZA-230

  

The ZA-230 is a power amplifier well-suited for broadcasting paging and supplying background music in restaurants, pubs, shops, houses of worship and so on. 

Specifications

Power Source	240 V AC, 50 Hz
Rated Output	30 W
Power Consumption	34 W (AC operation at EN60065)
Frequency Response	50 Hz - 20 kHz
Distortion	1 % or less at 1 kHz, 1/3 rated power
Input	MIC 1: -60 dB* (1.0 mV), 600 Ω, Unbalanced, Equivalent to 5-pin DIN Type MIC 2: -60 dB* (1.0 mV), 600 Ω, Unbalanced, Equivalent to phone jack Type AUX 1, 2: -20 dB* (100 mV), 10 kΩ, unbalanced, RCA pin jack
Output	Speaker out: Floating balanced High impedance: 330 Ω (100 V) Low impedance: 4 Ω (11 V)
S/N Ratio	60 dB or more (MIC 1, 2) 70 dB or more (AUX 1, 2)
Tone Control	Bass: -10 dB at 100 Hz Treble: -10 dB at 10 kHz
Muting	MIC 1 overrides other Mic input and AUX inputs with 0 - 30 dB attenuation, attenuation by switch
Indicator	Power LED, Signal LED
Finish	Panel: ABS resin, black Hair Line Case: Steel plate, black
Dimensions	350 (W) × 105 (H) × 240 (D) mm (13.78" × 4.13" × 9.45")
Weight	3.5 kg (7.72 lb)

* 0 dB = 1 V

ZA-1240SS-AS

  

Specifications

Power Source	230V AC, 50/60HZ
Rated Output	240W
Power Consumption	252W
Frequency Response	50-18.000 Hz
Distortion	Less than 0.3% at 1 kHz, 1/3 rated power
Inputs ( Sensitivity, Impedance, Connector )	MIC 1 : -52dBV (2.5mV), 600Ω, Unbalanced, Equivalent to Phone Jack MIC 2 : -52dBV (2.5mV), 600Ω, Unbalanced, Equivalent to Phone Jack MIC 3 : -52dBV (2.5mV), 600Ω, Unbalanced, Equivalent to Phone Jack AUX 1 : 10dBV (316mV), 10kΩ, Unbalanced, RCA Pin Jack AUX 2 : 10dBV (316mV), 10kΩ, Unbalanced, RCA Pin Jack
Outputs Speaker out	Speaker output in screw connector
Outputs Direct line	100V = 42Ω ; 4 - 16Ω = 4 - 16Ω
Outputs Speaker Selector	5 – Zone selector (all zones simultaneously selectable), plug in screw, 1 all call
Outputs Pre Out	0dBV (1.0), 600Ω, Unbalanced, RCA Pin Jack
S/N Ratio	Over 65dB (MIC 1 – MIC 3), Over 75dB (AUX 1 – AUX 2)
Tone Controls	Bass ± 10 dB at 100 Hz ; Treble ±10 dB at 10kHz
Muting	MIC 1 overrides other input signals with 0 – 40dB attenuation by voice switch of MIC 1 input level
Indicators	Power LED, Signal LED
Finish	Front Panel : ABS Resin, Color Black, Case : Steel Plate, Painting Black
Dimensions	420 (W) x 110 (H) x 384 (D) in mm
Weight	12.8 kg
Accessory	AC Power Cord (1 Pc )

Notes : 
^* 0 dB V = 1.0 V
^** Specification is measured at the AC voltage of 230V

ZA-1360SS AS

  

Specifications

Power Source	230V AC, 50/60HZ
Rated Output	360W
Power Consumption	350W
Frequency Response	50-18.000 Hz, ± 3 dB
Distortion	Less than 0.3% at 1 kHz, 1/3 rated power
Inputs ( Sensitivity, Impedance, Connector )	MIC 1 : -52dBV (2.5mV), 600Ω, Unbalanced, Equivalent to Phone Jack MIC 2 : -52dBV (2.5mV), 600Ω, Unbalanced, Equivalent to Phone Jack MIC 3 : -52dBV (2.5mV), 600Ω, Unbalanced, Equivalent to Phone Jack AUX 1 : 10dBV (316mV), 10kΩ, Unbalanced, RCA Pin Jack AUX 2 : 10dBV (316mV), 10kΩ, Unbalanced, RCA Pin Jack
Outputs Speaker out	Speaker output in screw connector
Outputs Direct line	100V = 28Ω ; 4 - 16Ω = 4 - 16Ω
Outputs Speaker Selector	5 – Zone selector (all zones simultaneously selectable), plug in screw, 1 all call
Outputs Pre Out	0dBV (1.0), 600Ω, Unbalanced, RCA Pin Jack
S/N Ratio	Over 65dB (MIC 1 – MIC 3), Over 75dB (AUX 1 – AUX 2)
Tone Controls	Bass ± 10 dB at 100 Hz ; Treble ±10 dB at 10kHz
Muting	MIC 1 overrides other input signals with 0 – 40dB attenuation by voice switch of MIC 1 input level
Indicators	Power LED, Signal LED
Finish	Front Panel : ABS Resin, Color Black | Case : Steel Plate, Painting Black
Dimensions	420 (W) x 110 (H) x 384 (D) in mm
Weight	14.6 kg
Accessory	AC Power Cord (1 Pc )

Notes : 
^* 0 dB V = 1.0 V
^** Specification is measured at the AC voltage of 230V

ZA-2128S-AS

  

Specifications

Power Source	220V, 50/60Hz AC, or 24 V DC
Power Output	Rated 120W
Power Consumption	AC : 350W ( rated output ) AC : 170W ( operation at EN60065 ) DC : 15A ( operation at rated output )
Frequency Response	50 - 20,000 Hz (±3 dB)
Distortion	Less than 1% THD at 1kHz, 1/3 rated output power
Inputs ( Sensitivity, Impedance, Connector )	MIC 1 : Rear 1.0mV (- 60dB*) Balanced 600Ω, Phone Jack, Echo MIC 2 : Rear 1.0mV (- 60dB*) Balanced 600Ω, Phone Jack MIC 3 : Rear 1.0mV (-60dB*) Balanced 600Ω, Phone Jack MIC 4 : Rear 1.0mV (-60dB*) Balanced 600Ω, Phone Jack MIC 5 : Rear 1.0mV (-60dB*) Balanced 600Ω, Phone Jack AUX 1 : Rear 300mV (-10dB*) Unbalanced 10kΩ, RCA Pin Jack AUX 2 : Rear 300mV (-10dB*) Unbalanced 10kΩ, RCA Pin Jack AUX 3 : Rear 300mV (-10dB*) Unbalanced 10kΩ, RCA Pin Jack
Speaker Outputs	100V, 4Ω
PRE AMP OUT	1.0V (0dB*) Unbalanced 600Ω, RCA Pin Jack
PWR AMP IN	1.0V (0dB*) Unbalanced 10kΩ, RCA Pin Jack
REC OUT	1.0V (0dB*) Unbalanced 600kΩ, RCA Pin Jack
Phantom Power	DC + 21V (MIC 1)
Noise Level (S/N)	More than 80dB at all volume control full CCW More than 50dB at all volume control full CCW
Output Regulation	Less than 3 dB no load to full load
Controls	Front : 5 Microphone Gain Controls Front : 3 Aux Gain Controls Front : 8 Bass Tone Controls Front : 8 Treble Tone Controls Front : 1 Echo Level Controls Front : 1 Master Controls Front : 1 Power ON / OFF Switch
Tone Control	Bass : ±10 dB at 100Hz, Treble : ±10 dB at 10 kHz
Indicators	1 LED signals, 1 LED Peak, 1 LED Power ON
Ambient Temperature	0° C to 40° C
Dimensions	420 (W) x 144 (H) x 361 (D) in mm
Weight	13 kg
Finish	Front Panel : Aluminum Gray ; Case : Steel plate, Gray

^* Notes :
Specifications are measured on 220V AC

ZA-2248S-AS

  

Specifications

Power Source	220V, 50/60Hz AC, or 24 V DC
Power Output	Rated 240W
Power Consumption	AC : 600W ( rated output ) AC : 330W ( operation at EN60065 ) DC : 20A ( operation at rated output )
Frequency Response	50 - 20,000 Hz (±5 dB)
Distortion	Less than 1% THD at 1kHz, 1/3 rated output power
Inputs ( Sensitivity, Impedance, Connector )	MIC 1 : Rear 1.0mV (- 60dB*) Balanced 600Ω, Phone Jack, Echo MIC 2 : Rear 1.0mV (- 60dB*) Balanced 600Ω, Phone Jack MIC 3 : Rear 1.0mV (-60dB*) Balanced 600Ω, Phone Jack MIC 4 : Rear 1.0mV (-60dB*) Balanced 600Ω, Phone Jack MIC 5 : Rear 1.0mV (-60dB*) Balanced 600Ω, Phone Jack AUX 1 : Rear 300mV (-10dB*) Unbalanced 10kΩ, RCA Pin Jack AUX 2 : Rear 300mV (-10dB*) Unbalanced 10kΩ, RCA Pin Jack AUX 3 : Rear 300mV (-10dB*) Unbalanced 10kΩ, RCA Pin Jack
Speaker Outputs	100V, 4Ω
PRE AMP OUT	1.0V (0dB*) Unbalanced 600Ω, RCA Pin Jack
PWR AMP IN	1.0V (0dB*) Unbalanced 10kΩ, RCA Pin Jack
REC OUT	1.0V (0dB*) Unbalanced 600kΩ, RCA Pin Jack
Phantom Power	DC + 21V (MIC 1)
Noise Level (S/N)	More than 80dB at all volume control full CCW More than 50dB at all volume control full CCW
Output Regulation	Less than 3 dB no load to full load
Controls	Front : 5 Microphone Gain Controls Front : 3 Aux Gain Controls Front : 8 Bass Tone Controls Front : 8 Treble Tone Controls Front : 1 Echo Level Controls Front : 1 Master Controls Front : 1 Power ON / OFF Switch
Tone Control	Bass : ±10 dB at 100Hz, Treble : ±10 dB at 10 kHz
Indicators	1 LED signals, 1 LED Peak, 1 LED Power ON
Ambient Temperature	0° C to 40° C
Dimensions	420 (W) x 144 (H) x 361 (D) in mm
Weight	14.5 kg
Finish	Front Panel : Aluminum Gray ; Case : Steel plate, Gray

^* Notes :
Specifications are measured on 220V AC

ZA-D500

  

PALAPA NUSANTARA ELECTRIC
Jl. Kapi Minda III / 11-J / 16 Sawojajar II Malang
Telp. 0341-722910 
Hp. 081232033025 / 085755087740
www.palapanusantara.com

PA Speaker TOA

TOA ZS-645R

Type	Flush Ceiling Mount
Rated Output	6W
Rated Input Selection/Impedance	6W, 3W, 1.5W, 0.8W (100V line)
Frequency Response	100 ~ 12.000 Hz
Sound Pressure Level (1W/1m)	90 dB
Speaker Components	12 cm dynamic speaker
External Dimensions	191 x 74mm
Speaker Mounting Hole	150mm
Weight	610g
Finish	Panel : ABS resin, Off white

TOA ZS-646R

Type	Flush Ceiling Mount
Rated Output	6W
Rated Input Selection/Impedance	6W, 3W, 1.5W, 0.8W (100V line)
Frequency Response	100 ~ 12.000 Hz
Sound Pressure Level (1W/1m)	90 dB
Speaker Components	12 cm dynamic speaker
External Dimensions	191 x 74mm
Speaker Mounting Hole	150mm
Weight	620g
Finish	Panel : ABS resin, Off white

TOA ZS-2852

Specifications

Speaker Component	8*(20cm) coaxial 2-way cone-type
Rated Input	100V Line : 15W, 70V LINE : 15W
Impedance	100V LINE : 670 ohm (15W), 1 kohm (10W), 2kohm (5W), 3.3 kohm (3W), 70V LINE : 330 ohm (15W), 670 ohm (7.5W), 1 kohm (5W), 2kohm (2.5W), 3.3 kohm (1.5W)
Sound Pressure Level (1W/1m)	96 dB
Frequency Response	45-20.000Hz
Input terminal	Push-Interminal
Finish	Baffle: Steel plate net, off-white, paint/Grille : Surface-treated steel plate Net, off-white, paint
Dimensions	Ø280 x 92 (D)mm ( Ø11.02” x 3.62”)

TOA Z-2852C

The Z-2852C ceiling and wall-mounted speaker covers a wide area and can be used for 25, 70 and 100 V line applications. Well-balanced sound can be heard uniformly at any location.

Specifications

Enclosure	Bass reflex type
Rated Input	60 W (High Impedance)
Power Handling Capacity	Continuous pink noise: 90W (8ohm), 60W (16ohm), Continuous program: 180W (8ohm), 120W (16 ohm)
Impedance	100V LINE : 170 ohm (60W), 330 ohm (30W), 670 ohm (15W), 3.3 kohm (10W) / 16 ohm, 8 ohm (low impedance)
Sound Pressure Level	91 dB (1 W, 1 m)
Frequency Response	60-20.000Hz
Speaker Component	16cm cone-type speaker and dome tweeter
Input Terminal	Removable locking connector with screw-dome terminals
Finish	Enclosure : steel plate , plating/baffle; Fire resistant ABS resin (resin material grade; UL-94V-0 or its eqv), white paint;
Dimensions	Ø280 x 227 (D)mm
Weight	5.1kg
Accessory	Panel x 1, Safety wire x 1, ceiling reinforcement bracket x 1, paper pattern x 1

Z-122C

  

The Z-122C ceiling and wall-mounted speaker covers an extremely wide area and can be used for 25, 70 and 100 V line applications. Well-balanced sound can be heard uniformly at any location.



Specifications

Enclosure	Bass reflex type
Rated Input	30 W (High Impedance)
Power Handling Capacity	Continuous pink noise: 60 W (8 Ω), 30 W (16 Ω) Continuous program: 120 W (8 Ω), 60 W (16 Ω)
Impedance	100 V line: 330 Ω (30 W), 1 kΩ (10 W), 3.3 kΩ (3 W), 10 kΩ (1 W) 70 V line: 170 Ω (30 W), 330 Ω (15 W), 1 kΩ (5 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W) 25 V line: 170 Ω (3.7 W), 330 Ω (1.9 W), 1 kΩ (0.6 W), 3.3 kΩ (0.2 W), 10 kΩ (0.06 W) 16 Ω, 8 Ω
Sound Pressure Level	90 dB (1 W, 1 m)
Frequency Response	70 Hz - 20 kHz (-10 dB), 50 Hz - 20 kHz (-20 dB) at installation in 1/2 free sound field (Measured by installing the unit in the center of a ceiling.)
Speaker Component	12 cm cone-type
Mounting Hole	φ200 mm (Maximum ceiling thickness: 37 mm)
Input Terminal	Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals)
Usable Cable	Solid copper wire: φ0.5 - φ1.6 mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5 m㎡ (equivalent to AWG No. 24 - 14)
Finish	Enclosure: Steel plate, plating Baffle: Fire-resistant ABS resin (resin material grade: UL-94 V-0), black Rim: Fire-resistant ABS resin (resin material grade: UL-94 V-0), white, paint Punched net: Steel plate, white, paint
Dimensions	φ230 × 229 (D) mm
Weight	3.7 kg (including mounting accessories)
Accessory	Panel …1, Ceiling reinforcement ring …1, Safety wire …1, Paper pattern …1
Option	Digital processor: DP-0206, Anchor hanging bracket: ZY-AH1, Back can: ZY-BC1, Tile bar bridge: ZY-TB1, Trim ring: ZY-TR1

  
[Note] The Z-122C is used with the DP-0206 Digital processor.

Z-2322C

  

The Z-2322C ceiling and wall-mounted speaker covers an extremely wide area and can be used for 25, 70 and 100 V line applications. Well-balanced sound can be heard uniformly at any location.



Specifications

Enclosure	Bass reflex type
Rated Input	30 W (High Impedance)
Power Handling Capacity	Continuous pink noise: 60 W (8 Ω), 30 W (16 Ω) Continuous program: 120 W (8 Ω), 60 W (16 Ω)
Impedance	100 V line: 330 Ω (30 W), 1 kΩ (10 W), 3.3 kΩ (3 W), 10 kΩ (1 W) 70 V line: 170 Ω (30 W), 330 Ω (15 W), 1 kΩ (5 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W) 25 V line: 170 Ω (3.7 W), 330 Ω (1.9 W), 1 kΩ (0.6 W), 3.3 kΩ (0.2 W), 10 kΩ (0.06 W) 16 Ω, 8 Ω
Sound Pressure Level	90 dB (1 W, 1 m)
Frequency Response	70 Hz - 20 kHz (-10 dB), 50 Hz - 20 kHz (-20 dB) at installation in 1/2 free sound field (Measured by installing the unit in the center of a ceiling.)
Speaker Component	12 cm cone-type
Mounting Hole	φ200 mm (Maximum ceiling thickness: 37 mm)
Input Terminal	Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals)
Usable Cable	Solid copper wire: φ0.5 - φ1.6 mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5 m㎡ (equivalent to AWG No. 24 - 14)
Finish	Enclosure: Steel plate, plating Baffle: Fire-resistant ABS resin (resin material grade: UL-94 V-0), black Rim: Fire-resistant ABS resin (resin material grade: UL-94 V-0), white, paint Punched net: Steel plate, white, paint
Dimensions	φ230 × 200 (D) mm
Weight	3.7 kg (including mounting accessories)
Accessory	Panel ……1, Ceiling reinforcement ring ……1, Safety wire ……1, Paper pattern …1
Option	Anchor hanging bracket: ZY-AH1, Back can: ZY-BC1, Tile bar bridge: ZY-TB1, Trim ring: ZY-TR1

Z-2352C

  

The Z-2352C ceiling and wall-mounted speaker covers an extremely wide area and can be used for 25, 70 and 100 V line applications. Well-balanced sound can be heard uniformly at any location.



Specifications

Enclosure	Bass reflex type
Rated Input	30 W (High Impedance)
Power Handling Capacity	Continuous pink noise: 60 W (8 Ω), 30 W (16 Ω) Continuous program: 120 W (8 Ω), 60 W (16 Ω)
Impedance	100 V line: 330 Ω (30 W), 1 kΩ (10 W), 3.3 kΩ (3 W), 10 kΩ (1 W) 70 V line: 170 Ω (30 W), 330 Ω (15 W), 1 kΩ (5 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W) 25 V line: 170 Ω (3.7 W), 330 Ω (1.9 W), 1 kΩ (0.6 W), 3.3 kΩ (0.2 W), 10 kΩ (0.06 W) 16 Ω, 8 Ω
Sound Pressure Level	90 dB (1 W, 1 m)
Frequency Response	70 Hz - 20 kHz (-10 dB), 50 Hz - 20 kHz (-20 dB) at installation in 1/2 free sound field (Measured by installing the unit in the center of a ceiling.)
Speaker Component	High frequency: Balanced dome-type, Low frequency: 12 cm cone-type
Mounting Hole	φ200 mm (Maximum ceiling thickness: 37 mm)
Input Terminal	Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals)
Usable Cable	Solid copper wire: φ0.5 - φ1.6 mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5 m㎡ (equivalent to AWG No. 24 - 14)
Finish	Enclosure: Steel plate, plating Baffle: Fire-resistant ABS resin (resin material grade: UL-94 V-0), black Rim: Fire-resistant ABS resin (resin material grade: UL-94 V-0), white, paint Punched net: Steel plate, white, paint
Dimensions	φ230 × 229 (D) mm
Weight	3.7 kg (including mounting accessories)
Accessory	Panel ……1, Ceiling reinforcement ring ……1, Safety wire ……1, Paper pattern …1
Option	Anchor hanging bracket: HY-AH1, Back can: HY-BC1, Tile bar bridge: HY-TB1, Trim ring: HY-TR1

Z-2352SC

  

The Z-2352SC ceiling and wall-mounted speaker covers an extremely wide area and can be used for 25, 70 and 100 V line applications. Well-balanced sound can be heard uniformly at any location.



Specifications

Rated Input	6 W (High Impedance)
Power Handling Capacity	Continuous pink noise: 9 W (8 Ω), 6 W (16 Ω) Continuous program: 18 W (8 Ω), 12 W (16 Ω)
Impedance	100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 10 kΩ (1 W), 20 kΩ (0.5 W) 70 V line: 830 Ω (6 W), 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W), 20 kΩ (0.25 W) 25 V line: 830 Ω (0.75 W), 1.7 kΩ (0.4 W), 3.3 kΩ (0.2 W), 10 kΩ (0.06 W), 20 kΩ (0.03 W) 16 Ω, 8 Ω
Sound Pressure Level	89 dB (1 W, 1 m)
Frequency Response	80 Hz - 20 kHz (-10 dB), 50 Hz - 20 kHz (-20 dB) at installation in 1/2 free sound field (Measured by installing the unit in the center of a ceiling.)
Speaker Component	High frequency: Balanced dome-type Low frequency: 12 cm cone-type
Mounting Hole	φ200 mm (Maximum ceiling thickness: 37 mm)
Input Terminal	Push-in connector (Bridging terminal-2 branch type)
Usable Cable	600 V Vinyl-insulated cable (IV wire or HIV wire) Solid copper wire: φ0.8 - φ1.6 mm (equivalent to AWG No. 20 - 15) 7-core twisted copper wire: 0.75 - 1.25 m㎡ (equivalent to AWG No. 18- 17)
Finish	Baffle: Fire-resistant ABS resin (resin material grade: UL-94 V-0), black Rim: Fire-resistant ABS resin (resin material grade: UL-94 V-0), white, paint Punched net: Steel plate, white, paint Dust-proof bag: Artificial fiber, black
Dimensions	φ230 × 154 (D) mm
Weight	1.5 kg (including panel)
Accessory	Panel …1, Paper pattern …1
Option	Back can: ZY-BC1 Reinforcement ring: ZY-RR2 Anchor hanging bracket: ZY-AH1 (ZY-RR2 required) Tile bar bridge: ZY-TB1 (ZY-RR2 required) Trim ring: ZY-TR1 (ZY-RR2 required)

Z-1522SC

  

The Z-1522SC ceiling and wall-mounted speaker covers an extremely wide area and can be used for 25, 70 and 100 V line applications. Well-balanced sound can be heard uniformly at any location.



Specifications

Rated Input	6 W (High Impedance)
Power Handling Capacity	Continuous pink noise: 9 W (8 Ω), 6 W (16 Ω) Continuous program: 18 W (8 Ω), 12 W (16 Ω)
Impedance	100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W) 70 V line: 830 Ω (6 W), 1.7 kΩ (3 W), 3.3 kΩ (1.5 W) 25 V line: 830 Ω (0.75 W), 1.7 kΩ (0.4 W), 3.3 kΩ (0.2 W) 16 Ω, 8 Ω
Sound Pressure Level	88 dB (1 W, 1 m)
Frequency Response	65 Hz - 18 kHz (-10 dB), 45 Hz - 20 kHz (-20 dB) at installation in 1/2 free sound field (Measured by installing the unit in the center of a ceiling.)
Speaker Component	10 cm cone-type
Mounting Hole	φ135 mm (Maximum ceiling thickness: 37 mm)
Input Terminal	Push-in connector (Bridging terminal-2 branch type)
Usable Cable	600 V Vinyl-insulated cable (IV wire or HIV wire) Solid copper wire: φ0.8 - φ1.6 mm (equivalent to AWG No. 20 - 15) 7-core twisted copper wire: 0.75 - 1.25 m㎡ (equivalent to AWG No. 18 - 17)
Finish	Baffle: Fire-resistant ABS resin (resin material grade: UL-94 V-0), black Rim: Fire-resistant ABS resin (resin material grade: UL-94 V-0), white, paint Punched net: Steel plate, white, paint Dust-proof bag: Artificial fiber, black
Dimensions	φ155 × 117 (D) mm
Weight	1 kg (including panel)
Accessory	Panel …1, Paper pattern …1
Option	Reinforcement ring: ZY-RR1

ZY-BC1

  

The ZY-BC1 Back Can is a metal case attached to flush-mount ceiling speaker when mounted in exposed applications. The Back Can is hung from a ceiling suspension pipe.



Specifications

Finish	Surface-treated steel plate, t0.8, black, paint
Weight	1.5 kg
Accessory	Rubber grommet …2

ZY-TR1

  

The ZY-TR1 Trim Ring allows installation of flush-mounted ceiling speakers in pre-existing ceiling panel holes which are over 200 mm in diameter. The use of 2 Trim Rings allows the speaker to be mounted in holes from 240 mm to 300 mm in diameter.



Specifications

Ceiling Hole Diameter	φ200 - φ300 mm
Finish	Surface-treated steel plate, white, paint
Weight	500 g

ZY-TB1

  

The ZY-TB1 is a channel bar to be used when supporting flush-mounted ceiling speakers by way of ceiling bars to prevent their full weight from being directly applied to the ceiling panel during installation. This channel bar is used in conjunction with reinforcement hardware supplied with the speaker. One complete set consists of 2 ZY-TB1 bars.




Specifications

Finish	Steel plate, plating
Weight	500 g (for set of 2 bars)